I think you're significantly underestimating how much air you need to move. |
| So, I haven't read all of the responses but your fan is undersized. If your bathroom is 125-150 by 8, you need at least 150 CFM fan. Go measure your bathroom preciously and calculate what size fan is needed. A lot of online calculators available. |
| Something about this story doesn't make sense. You keep your fan on 24/7 literally?? |
OP here. What is it about my "story" that doesn't make sense? 1) It's not a "story". This is an actual, real issue we have going on that we're trying to solve. 2) Yes we have the exhaust fan running 24/7. Why is this hard to believe? |
I'm not significantly underestimating anything. I know we have an issue. I know there's a ton of moisture in the air that is not able to move and clear out. We tried the oscillating fan yesterday which we were pretty sure would not help but we wanted to at least try it. It did nothing, of course. Our current exhaust is rated at 110CFM, as one of the other PP's stated we need a more robust one. So going to look for that now as our next step. |
yup. I know this is expensive but this is the only fix that I see actually working. Your contractor screwed you, unfortunately! You do NOT want to risk mold in your house (its dangerous, can cause health problems, is very expensive to remove. need there!) so fixing moisture problems, to me, is a "need" not a "want" in regards to your home. Moisture will inevitably lead to mold. Good luck! |
dp - what's up with your attitude? people are trying to help. be grateful. geesh |
Yes our contractor screwed up, and screwed us. There's a lot of drama surrounding the entire remodel with this issue just being yet another one. We certainly don't want a mold issue so we're determined to fix it. |
Because you would have burned the motor by now. |
So far so good, it's running without any issues outside of it not being an adequate size. |
don't burn your house down |
110 CFM is a decent size. It's much more likely that it's improperly installed and not producing anywhere near that. It's a place where contractors take shortcuts all the time. The ducting is large and sometimes hard to route through the wall, and it's hidden once the wall is finished. So they kink it or crush it to make it fit, or they just leave it unattached in the wall. |
There's really no material difference between having air delivered by a HVAC vent vs having it exhausted by a vent fan and makeup air coming from the rest of the house. It's really the quantity of air that's the issue. |
When we moved into our house there was no HVAC vent in one of the bathrooms. It turns out the HVAC guy had installed it but the drywall guys had covered it up. It was literally a 20 minute fix. Something to check. |
| Where does the replacement air come from? |