Anonymous wrote:Anonymous wrote:For those of you who did this on the lower end - staying around 50k - who was your architect? Who are the architects in the DC/MoCo area that keep the prices lower?
mr. lowes or ms. homedepot.
Anonymous wrote:Ours was $30k. We removed a load bearing wall (had to create an arch support), removed soffits, built a bar, and switched locations of the stove and fridge but did not change plumbing. We did upgrade the waste line when the wall was removed as the pipes were 80 years old. Did lots of electrical, including a range hood. We replaced all appliances and got semi-custom cabinets and quartz counters. Kept our floor. I worked with a kitchen designer who ordered the counters, sink, and cabinets. Managed all the other work myself with contractors I knew and had worked with before (plumber, electrician, drywall contractor and handyman). It look forever but was a fraction of the cost. Contractors who have seen it think I spent $80k at least.
Anonymous wrote:Anonymous wrote:Anonymous wrote:Anonymous wrote:For those of you who did this on the lower end - staying around 50k - who was your architect? Who are the architects in the DC/MoCo area that keep the prices lower?
A sub 50k kitchen ain't using an architect. You aren't going to be changing the footprint got 50k. At most, you're replacing cabinets and appliances.
I'm the PP who took down a wall but got Home Depot cabinets and appliances on sale. We did hire a designer for $5k because we have no style sense but no architect. The Home Depot guy laid out our cabinets, and we and the designer tweaked them a little (like the size of the island). The contractor handled the permits and confirming that the wall was not load bearing.
Would you recommend your designer?
Anonymous wrote:We replaced everything in our kitchen and didn't move walls - cost was $70K for really good cabinets, new lighting, wood floors, quartzite countertops, island, all new appliances, hardware, etc. This was with a design build firm in Fairfax County - full service design and project management.
Anonymous wrote:Anonymous wrote:Anonymous wrote:For those of you who did this on the lower end - staying around 50k - who was your architect? Who are the architects in the DC/MoCo area that keep the prices lower?
A sub 50k kitchen ain't using an architect. You aren't going to be changing the footprint got 50k. At most, you're replacing cabinets and appliances.
I'm the PP who took down a wall but got Home Depot cabinets and appliances on sale. We did hire a designer for $5k because we have no style sense but no architect. The Home Depot guy laid out our cabinets, and we and the designer tweaked them a little (like the size of the island). The contractor handled the permits and confirming that the wall was not load bearing.
Anonymous wrote:Anonymous wrote:For those of you who did this on the lower end - staying around 50k - who was your architect? Who are the architects in the DC/MoCo area that keep the prices lower?
A sub 50k kitchen ain't using an architect. You aren't going to be changing the footprint got 50k. At most, you're replacing cabinets and appliances.
Anonymous wrote:For those of you who did this on the lower end - staying around 50k - who was your architect? Who are the architects in the DC/MoCo area that keep the prices lower?
Anonymous wrote:For those of you who did this on the lower end - staying around 50k - who was your architect? Who are the architects in the DC/MoCo area that keep the prices lower?
Anonymous wrote:OP here—in Chevy chase, md. The wall is not load-bearing.
One well known kitchen design firm (cabinet sellers) quoted $155-$210K which is outrageous
I want the non-Chevy chase price