Anonymous wrote:You can try duct sealing (Aeroseal) which is endorsed by EPA. I did it and it has made a difference --they measured that I was losing about 40% of my efficiency due to leaks in my ducts (which most homes have). And the duct sealers found a 8x12 hole in my duct, behind drywall that I never would have found, which had been there since construction! They said they find them fairly frequently.
http://www.greenspirationhome.com/new-duct-sealant-may-cure-leaky-ducts-%E2%80%93-and-lower-home-energy-consumption/
But you might want to do an energy audit first.
I used these guys who were recommended by my energy auditor (Home Energy Detective):
http://www.atlanticductcleaning.com/aeroseal/index.html
And no, I'm not a shrill for these folks, just a happy customer.
Anonymous wrote:We had the same problem, also with a system that was supposedly new in 2004 or 2005. We tried all the tricks and they did not work. Finally had to replace the AC system. It seemed that the one that was supposedly new in 2004/5 was cheap and some of the ducts were not done properly. I'd get a reliable, recommended A/C guy to come and look at it.
Anonymous wrote:Have you repositioned the dampers on the duct return in your basement? Mine are labeled open winter, close summer etc. It makes a huge difference. A good AC guy should label them and tell you how to maximize.
Anonymous wrote:Manually close a few of the vents on the lower floors, it will increase the air flow to the top floor. I do it with my basement because the basement and first floor are on the same condenser. When I close the basement vents the first floor is very noticeably cooler.